GW manufacturing sincerely to invite you to 2022 EuroBike exhibition.This year our staff members from GW Taichung headquarter and EU team will be there, so please don't be hesitate come directly by to visit our booth. We will show you the newest and unique products.
If you’d like to book an appointment, please email to your sales contact or email to email@example.com
Welcome to visit GW at Taipei Cycle show, GW Manufacturing will have a booth in Hall 1 on the 4th floor where we will be displaying our several new and modern products. including RCS SL Hub, BB86/92, ICR CORE SET, UDH, switch system, headset and chain guide at the booth.
Please make sure to book your meeting with us so we can show you all the detail. If you don’t already have a sales contact, please email us at firstname.lastname@example.org or contact us via the form on the About page of this website.
Covid-19 Pandemic is not over yet. As bicycle supply chain disruption continues, GW remains actively expanding capacity to satisfy rising demand.
Since the pandemic started, GW has been busy making investment in increasing facilities, machineries, skilled manpower, etc, to fulfill growing market demand and to offer our products with competitive lead times.
This month, 20 newly purchased machining centers have finally arrived at GW main factory, currently under pre-setup and installation process before they are ready to boost up production capacity. As usual, GW insists on investing high standards machining centers made in Japan, just like GW strives to offer only the best products to all customers.
After the cancellation of Eurobike Show last year due to the coronavirus crisis, Eurobike has announced the show is on board this year. Eurobike 2021 will take place as scheduled between Sep 1, 2021 and Sep 4, 2021.
Due to entry restrictions and quarantine requirements in Taiwan, staff members from GW Taichung headquarter will not be participating this year, but our EU sales representatives will be there, so please come by to visit us at B3-206. On display will be our star ratchet hub, thru axles, headsets, seat clamps, chain guides and UDH.
If you’re attending 2021 Eurobike, we’d love to catch up!
If you’d like to book an appointment with our team representatives, please email to your sales contact or email to email@example.com
Two months have passed since the CECC raised epidemic warning to Level 3. Due to the trend of low case numbers appeared stable, although level 3 alert has been extended to July 26, restrictions and measures have been partially lifted.
For the last two months GW has implemented work from home protocols as preventive measures, but as pandemic situation appeared to be stable, we have decided to let GW staff return to workplace.
To return our staff to the workplace, we carefully followed the CECC’s safety guidelines to prevent and reduce transmission at work. On July 14, 2021, we have each of our employees performed rapid antigen tests for COVID-19 in separate groups to confirm all results were negative. On the same day, we announced all staff members to return to workplace starting the next day with safety procedures to follow, such as wearing face masks at all time, body temperature to be measured three times a day, and to rearrange seating plan so that social distancing is maintained.
We are pleased to announce GW Manufacturing have resumed normal operations. We appreciate your understanding and continued support during these difficult and challenging times.
Every year at this time, GW Manufacturing is a proud supporter of the MACC fund and their fight against childhood cancers. For more than forty years, MACC has provided more than $65 million in funding to research and cures.
In August, Trek will be holding the Trek 100 cycling event in Waterloo, Wisconsin which will help to raise more funds for the MACC fund. You can check out more information about this event here: https://secure3.convio.net/maacc/site/TR?fr_id=1090&pg=entry
For more information about the MACC fund and donate, you can check out their website: https://maccfund.org.